PIC & PLACE ROBOT

It is based on micro controller its suitable for . All circuits are mounted on vehicle which is controlled by computer through interface. C programming is used for controlling the vehicle and micro controller for rotating the veh and ARMS

The pic and place robo is used to pic the material from one place to another place control through PC . It has along arm that extends several feet from a heavy base. The end keeps the crane from tipping over. The end of the jib has a pulley. A rope, with a lifting hook in the end runs from pull to a winch (crank) in the foundation. The operator turns the winch to lift or lower the hook the arm is lowered. Thus a robo move a weight to any point around the circumference of the circle its jib makes. The pillar jib has a pillar rising from its base a cable attached to the top of the pillar rises and lowers the end of the jib so that the jib can be moved up and down as well as from side to side. When the jib moves up it carries the load toward the base of the robo lowered. It moves the load away form the base. Factories and foundries often use. This type of robo moves back and forth on a bridge extending across the width of a factory building. .